На главную
Видео добавленное пользователем “userwl2850”
Extreme feed rate of .040"  1mm per revolution.  Getting under the crust.
 
01:38
GRADE 5 TITANIUM. Removing the outer surface.
Просмотров: 7569 userwl2850
HOW TO MAKE A TREPANNING TOOL.
 
03:55
this tool will cut a 10 inch hole in metal.
Просмотров: 33205 userwl2850
TURNING AND BORING TITANIUM . with core return.
 
03:07
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 17848 userwl2850
1000mm long INCONEL 718 bar 200mm hole bored thru.  156mm core recovered
 
07:14
When 2 inch (50mm) is too big. 1000mm long INCONEL 718 bar with 200mm hole bored thru. 156mm core recovered by method of trepanning. Problem solving when bed length is not long enough.
Просмотров: 7361 userwl2850
Drilling a 9" hole thru 15" O1 tool steel
 
03:20
Просмотров: 2218 userwl2850
for SUNPPAA why turning away from the chuck is better.
 
01:20
304 stainless steel. my favourite machine channel asked why i always turn away from the chuck. this forging is 2000mm long and turning towards the chuck would not be possible without using a steady rest which would easy add 2 hours extra time to turn. 7mm cut to remove the scale both ways.
Просмотров: 10275 userwl2850
SANDVIK 1020 carbide. To cut MONEL K500
 
03:37
Просмотров: 4323 userwl2850
step by step guide to make a trepanning tool.
 
09:42
visit www.tooltekprecision.co.uk
Просмотров: 17416 userwl2850
making a pull bore tool to cut a 360mm hole.
 
14:06
watch me make a tool to finish cut 13" hole through steel bar.
Просмотров: 25813 userwl2850
Making a cutting tool to drill thick steel.
 
12:25
Просмотров: 13569 userwl2850
BORE TURN AND COUNTERBORE F55 SUPER DUPLEX
 
13:03
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 12722 userwl2850
Making a 13.25" 336mm TREPANNING TOOL to cut through 20" long steel bar.
 
13:08
this tool is to hold in a lathe tool post. All parts were made on manual Bridgeport miller, Dean Smith and Grace lathe and a Denham turret lathe by myself. it will cut a 13.25" hole through 20" long steel bar in one pass or 40" long half and half. the core will be 11.5" which can be used to make other things. If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 55752 userwl2850
9" hole bored thru 15" long inconel 718
 
01:48
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 4653 userwl2850
G5 Titanium 102mm turned to 72mm.
 
09:59
At 6.15 and 8.55 it catches fire from the compression of the steel from the steady rest and the chuck jaws.
Просмотров: 8481 userwl2850
Turning a bent forging into round bar. G5 Titanium
 
03:16
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 7386 userwl2850
TITANIUM G5. TURN FACE AND BORE.
 
02:38
I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 3026 userwl2850
Double tool turning. Inconel 718 forged bar.
 
10:16
large size turned to 180mm from 205mm. 17 rpm 8 thousands feed. small size turned to 100mm from 125mm 36 rpm 10 thousands feed. If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 89068 userwl2850
TREPANNING STAINLESS STEEL. 17/4 ph.
 
01:39
boring a 230mm hole through 600mm long bright bar.
Просмотров: 4887 userwl2850
Awkward holding Titanium forging. Bored to 186mm.
 
04:14
Titanium forged ingot. I had to bore without any machining to any outside diameter. If this was a heavy steel it would not be safe to hold like this.
Просмотров: 4421 userwl2850
TURNING 4140 STEEL. 11.5" TO 10" X 125" LONG.
 
04:03
1.5" OR 38MM turning 4140 steel bar.
Просмотров: 5878 userwl2850
Alloy A286 8"diameter 20"long. Bored at 5" by trepanning.
 
03:01
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 2203 userwl2850
HOW TO BORE  ALLOY 718 STEEL FORGINGS.
 
04:05
I FIRST MAKE A SLEEVE (SPIDER) TO FIT THE FORGING INSIDE. BORE HALF WAY TURN AROUND TO FINISH. NO TURNING NEEDED.
Просмотров: 41262 userwl2850
BAD CNC MILLING  MACHINING. CORRECTING MISTAKES.
 
06:13
Просмотров: 3345 userwl2850
Grade 5 Titanium 81mm turn to 72mm x3000 long.
 
06:38
Просмотров: 5701 userwl2850
Alloy 925 bored to 146mm by trepanning.
 
03:15
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 3804 userwl2850
deep hole boring. 11" hole bore through 32" long inco 718 stainless steel.
 
02:02
11 inch-279mm bore x 32inch-813mm long. gives a 240mm core return.
Просмотров: 4841 userwl2850
Throwing a bent forged bar to clean up. 7"- 6.75" x 120"long with 1"bend
 
02:24
grade 5 titanium bar over 1" bent. firstly center each end by hand. set in lathe and clock the center of the bar. turn the first half from the center to the tailstock. turn around and repeat. use a 45 degree cuting tool to reduce chatter and vibration. If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 9892 userwl2850
Turning 304 stainless forged bar. 285mm - 254mm.
 
02:18
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 3109 userwl2850
Eckington classic car show 2018. Renishaw Hall
 
08:36
Просмотров: 372 userwl2850
Machine installation. Craven lathe pt 2.
 
33:10
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 2972 userwl2850
Forged grade 5 Titanium.  Turn and remove centre holes.
 
09:27
130mm turned to 115mm x 1000mm long.
Просмотров: 5911 userwl2850
TURNING G5 TITANIUM. 77mm to 70mm x 4mtr long.
 
06:49
centre both ends. set job half length chuck to tailstock. set cut to leave 1mm above finished size and cut half way. set finish cut to size. set finish size to chuck and repeat. turn job around and repeat. If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 15100 userwl2850
Lathe chuck jaw safety. over tightening possible dangers. sunppaa.
 
01:03
youtube channel "sunppaa" had a few comments on his videos "daily chatter 36" and 37. myself and others were concerned for his safety tightening down hard on the end of the jaws. it is dangerous as the jaws can break as you can see in this video. imagine one breaking as you start a cut,,, the job would fly out at speed at best missing you,,, at worst hitting you. i have seen it happen before many times. always think "what if" and if you think there could be a bad thing happen DONT do it. we only have 1 life why risk it to save a few moments of time. not worth it. stay safe.
Просмотров: 1738 userwl2850
HOW A JET WING WORKS ON LANDING. OVER WING VIEW.
 
01:47
landing at stanstead airport.
Просмотров: 20780 userwl2850
Heavy roughing and finishing cuts 304 stainless steel
 
10:08
This steel cuts very easy but is difficult to get it to chip. It sticks to itself as you cut it and the best way I find to get a good finish is a .010" or .25mm finish cut.
Просмотров: 7831 userwl2850
SHEFFIELD WEDNESDAY BAND. OWLS VS BIRMINGHAM. OWLS WIN.
 
01:42
THE SLEEPING GIANTS ARE AWAKE. ,,,,,,, WIDE AWAKE. THE BAND PLAYS ON. swfc and england band.
Просмотров: 6743 userwl2850
TREPANNING 9" HOLE THRU 37" LONG INCO 718.
 
01:17
25 RPM WITH 0.003" FEED RATE.
Просмотров: 3386 userwl2850
drilling 240 mm through 400mm long 4145 steel bar
 
00:51
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 2913 userwl2850
Machining Alloy 718 solution annealed.  290mm-262mm.
 
03:26
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Просмотров: 1582 userwl2850
TURNING AND BORING ALLOY A286. 345mm X 203mm X 1000mm.
 
02:54
trepanning gives a core to use again. alloy A286 is a tough stainless steel with a high nickel content.
Просмотров: 2246 userwl2850
TREPANNING DUPLEX F55 STAINLESS. 12" BORE 11" LONG.
 
02:02
RUN AT 98 RPM WITH 0.006" FEED RATE. GIVES BACK AN 11" CORE TO BE USED FOR ANOTHER JOB.
Просмотров: 6600 userwl2850
trepanning 3.25"  hole thru 25" long EN24T steel bar.
 
01:22
I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 2376 userwl2850