На главную
Видео добавленное пользователем “catsclouds”
( autofocus ) lumix fz70 / fz72 test 60x zoom
 
02:28
This is handheld (freehand). The other videos I posted were manual focus here is a auto focus test zoom of the moon with the panasonic lumix fz70 / fz72 super zoom camera this is P mode with focus set to auto. In Intelligent Auto mode you can't access the digital zoom I believe as I couldn't figure out how to do it. optical zoom , digital zoom , 60x zoom 20-1200mm
Просмотров: 210002 catsclouds
Nikon P600 zoom test 2 - zoom to moon
 
05:42
Zoom Test 1 https://www.youtube.com/watch?v=VUcoPjuW6_k Nikon super zoom camera test p600 zoom test 2 - zoom to moon. This is on a Vivatar tripod which was $30, now you may think this tripod is shaky but when you are zoomed so far out just touching the camera will make it shake. The tripod is almost pointed straight up to get this video. coolpix
Просмотров: 187075 catsclouds
planes  nikon coolpix p600 super zoom
 
02:28
This is video of planes using the Nikon Coolpix P600 super zoom camera click 1080P for best quality if you have fast internet. All video is handheld with no tripod. I live right under flight path so there is many planes every hour. 24mm-1440mm
Просмотров: 75999 catsclouds
How to Thread Brother LS2000 sewing machine
 
21:33
Please read below If you have highspeed connection please click 1080P setting for best quality for video PLEASE SEE Update July 12/2013 - it seems i missed the "thread guide on the needle clamp" see video here http://www.youtube.com/watch?v=n8SlyQAGljs - I am not expert, this is my first sewing machine and I have only used it for maybe 1 hour. - I don't know if this is the right or wrong way to do this threading procedure but this is how I figured out how to do it. - This is video of how to thread the top and bottom of the machine. The most confusing part for me was understanding I had to bring up the lower thread when I first got the machine. In this video after I show you how to install the bobbin case I will show how to bring up the lower thread 2 or 3 times from different angles. - When turning the needle down to bring up the lower thread turn the knob on the side of the machine counter-clockwise. Don't use the pedal, use the knob because the pedal is too fast. -it might take you a couple of times to understand how to bring up the lower thread as it might not work on the first try or you may get a tangle. Just remove the case and bobbin and free any tangles and try again. 0:50 - how to wind thread on the lower bobbin 3:09 how to thread the top thread 6:43 How to install and remove lower bobbin case , how to open latch 8:32 How to install lower bobbin and thread into bobbin case 13:44 How to bring up the lower thread , multiple angles this is video of how to thread top and bottom on a ls-2000 brother sewing machine
Просмотров: 395829 catsclouds
Canada Geese Fly Away
 
02:16
Click 1080P for best quality. These canada geese were staying around the parking lot and I was just eating lunch watching, I guess I was bird watching? Then suddenly from the distance one of them heard a sound then the rest looked the same direction which was north west. They proceeded to honk , then empty their bowels which I researched are called cloacas. Then they very quickly spread their wings ran and took off into the air. It was amazing to see it up close. Please like my video and subscribe. Geese are migratory birds , hope they stay safe.
Просмотров: 23254 catsclouds
My attempt at an asthma puffer spacer in my emergency
 
02:51
I was in a hotel in the middle of nowhere and got very sick and only had my puffers with me no chamber / spacer. So while sitting around I tried cutting up a plastic bottle for a breathing / puffer spacer chamber
Просмотров: 10999 catsclouds
Part 2 - Panasonic Lumix DMC-FZ70 / FZ72 Zoom test Handheld
 
03:00
Part 2 - Panasonic Lumix DMC-FZ70 Zoom test free hand Hand held or FZ72
Просмотров: 122910 catsclouds
Hand Held Lumix FZ70 / FZ72 camera zoom of the moon
 
01:30
Hand Held Lumix FZ70 / FZ72 zoom of the moon Shot in P mode with focus set to manual lumix fz72 sx50 canon
Просмотров: 29405 catsclouds
Feral Cat comes inside house for the first time
 
09:09
This is a fixed feral cat that came in the house for the very first time. She usually eats right outside in the backyard. Hoping she will come inside because int he winter it is hard to go in and out. Feral means a cat that has been born and raised wild. As opposed to a stray cat which is an abandoned pet or a pet that has become lost. She has never been inside a house and won't come 10 feet close to any humans. She looks fat? I have no explanation for that , this is how she always looked since her surgery. She was carrying kittens and after the surgery this is how she looked. I researched it and it is called "cat belly flap" Like loose skin. But not sure. She is really interesting because she never makes a sound. No meow or purr. I have been feeding her for 1 year and a half and have never hear and kind of vocal sound from her.
Просмотров: 28746 catsclouds
Full moon zoom with  lumix DMC FZ70 camera ( Hand held)
 
02:57
Click 1080P if you have fast connection. This is what you are waiting for? full moon lol. It looks really good video I think, what do you think? Full moon zoom with DMC Panasonic Lumix FZ70 / FZ72 camera , this is recorded hand held / free hand no tripod in movie mode I think it looks beautiful video if you ask me. Really sharp and high quality. What do you think? Sorry I don't remember if this is manual or auto focus low light zoom of the moon 20-1200mm lens
Просмотров: 7891 catsclouds
Mini Lathe belt shredded
 
01:20
This is the drive belt from my 7x16 mini lathe shredded. I was drill some aluminum with a metric drill bit that seemed to grab a lot even stopping the chuck and finally I heard a knocking which turned out to be this rubber belt that stripped the teeth off it.
Просмотров: 2062 catsclouds
digital vs analog bathroom scales
 
01:43
Digital vs Analog (mechanical) bathroom scale , about 2 lbs difference in weight and maybe $10 in price. Though the differences may vary. The digital scale cost $19.95 the analog (dial) scale cost $11.97. Digital scales are usually considered to be more accurate because they self reset to zero. The important part about using a scales is the ability to reset it to zero. The analog scale has a dial at the bottom where you can manually set it to zero. Bathroom scales can be used as an effective way to measure weight gain or weight loss but it is important to try to use the same scale for consistency.
Просмотров: 45447 catsclouds
Panasonic Lumix DMC-FZ70 / FZ72 at Night video
 
05:44
Panasonic Lumix DMC-FZ70 / FZ72 at Night video ( low light / dark ) Mounted on a $5 Suction cup mount stuck to car windshield
Просмотров: 32894 catsclouds
feral cat shelter
 
04:36
Hello everyone, this is my home made feral cat shelter, right now no cats are using it. The box is a Rubbermaid from Walmart, the rest of the materials I bought from Homedepot. The inside is lined with this foil insulation,very similar to car sunshades people put in the front windshield. The pink board insulation is also from Homedepot,there are 2 layers on the bottom and all the sides have one layer. The material at the end is straw, not hay,some people when they see that think that is hay, but hay is a food product, straw is used for bedding and insulation,it does not absorb moisture like hay so don't use hay. The black tape is Gorilla tape, it is very strong, and better than duct tape in my opinion for this application , it doesn't seem to lift and handles cold better. This shelter is about 1 year old and has been through one winter, you can see none of the tape is lifting.
Просмотров: 3690 catsclouds
Stealth Cam G42NG Unboxing
 
09:43
This is an unboxing of the G42NG from Stealth Cam. it is a trail camera for those who don't know that you can leave by itself and it will take pictures and video when it detects movement. They are quite rugged and made for outdoors. It takes 8 AA batteries and the box states it has a 1 year battery lifespan but after using it I'm thinking that may be on the picture setting. I was using it to take HD 1280x720 videos about 60sec long with short delay and you can see on it's display has used up a little battery life. The clip at the end (9:16) with the possum and raccoon was in pitch black darkness with no back yard light so it is amazing this can take such clear video. I picked it up to keep track of my feral cat but unfortunately...she is nowhere to be seen only a lot of raccoons and opossum. The camera has a tripod mount so you can use one or it comes with a strap which you can strap around any object like a tree or even a fence post. It is very easy to use and even has 3 presets for quick startup where you can just use one of them to take picture or videos. It has a custom setting which I chose where I set a longer video time with a short delay in between clips. I read many reviews of people having problems in general with these trail cameras so I cannot comment on dependability as I have only had it for 2 weeks. I can tell you the camera would stop working if you cycled between the presets too many times or too fast it would say "waiting" so I would have to eject the battery tray and start it up again and it would be fine. Kind of like when your computer stops working and you have to restart it. I had no problems with it so far while it was actually running. For memory it uses a SD card and I used a 16GB card. You can remove the card easily to check the captures but you can also connect via usb without removing the card and download footage or pictures. Not only does this seems like a great camera for capturing wildlife images but you could easily use this as a security camera because it is fairly small and was no longer than the size of my size small hands. It would be very easy to conceal.
Просмотров: 803 catsclouds
7x16 mini lathe walk around
 
07:49
I have videos of work on this lathe at this channel now http://youtube.com/randomlathe . Click 1080P setting for best quality. This is just a walk around showing you my Micro Mark 7x16 mini lathe. This lathe in the video has a A2Z quick change tool post but it doesn't come with that. I bought this lathe from Mirco Mark Directly. I bought tooling like the quick change tool post from littlemachineshop online.
Просмотров: 11887 catsclouds
Cut plastic ring holders and help animals
 
04:41
did you know many animals can get stuck in these plastic drink/soda/beer holders and get injured or worse? Apparently these are supposed to be photodegradable meaning they degrade due to sun exposure but it takes around 3 months! Well that is not helpful when it takes only 5 min for a cat,dog,seagull or any wild animal to become entangled in the holes of the 6 pack rings. You can help the animals by cutting the holes or pulling them apart with your hands. Please share with your friends so they know about this issue as well because we should all work together to help the animals
Просмотров: 840 catsclouds
Part 1 - Panasonic Lumix DMC-FZ70 Zoom
 
02:15
Hand Held Panasonic Lumix DMC-FZ70 Super Zoom Part 3 zoom test https://www.youtube.com/watch?v=szpiUERAz6o Part 2 zoom test http://www.youtube.com/watch?v=Krgarw5958w Unboxing http://www.youtube.com/watch?v=e4TSKZYxkJY fz70 fz200 sx50 zoom fz72 superzoom stabilization
Просмотров: 37855 catsclouds
Quick disconnect for tig welding machine
 
03:11
This is some air line quick disconnects I bought to use as quick disconnects for the tig welding machine argon line. I read that airline fittings leak so I put the connector in a bucket of water to look for any bubbles. I don't see anything maybe you can? I will try this for now and see how it works out. I'm sure you could use this on your mig welder as well. At the end of the video I just release the pressure to show there was pressure in the line. The bubbles you see at first seems to be air trapped under the coupler sleeve that slides back and forth to release the fitting
Просмотров: 1577 catsclouds
skunk rescue at skate park
 
05:26
skunk with head stuck in cup at skate park. I got sprayed and everything smelled for a long time
Просмотров: 645 catsclouds
Feral Cats with Lumix FZ72 / FZ70
 
01:41
Feral cats video with panasonic , Lumix DMC FZ70 / FZ72 camera
Просмотров: 1838 catsclouds
how to sharpen Tig tungsten on a belt sander
 
01:31
here is how I sharpen all my tig torch tungsten using a belt sander. It's a lot less noisy than a grinder and less sparks,smoke. Good for indoors .
Просмотров: 1187 catsclouds
how to repair your glasses with tape
 
02:56
how to repair your glasses when the ear pieces break off. glasses spectacles
Просмотров: 90968 catsclouds
Panasonic Lumix DMC FZ70 Moon zoom video
 
05:20
See description below. Well I found the moon but it wasn't around for long lol. This is not handheld this is on a tripod. zoom of the moon with 20-1200mm 60X panasonic Lumix FZ70 / FZ72 super zoom camera Panasonic Lumix DMC FZ70 / FZ72 videos below Part 3 zoom test https://www.youtube.com/watch?v=szpiUERAz6o Part 2 zoom test http://www.youtube.com/watch?v=Krgarw5958w Part 1 zoom test http://www.youtube.com/watch?v=DM4Oj4DLXtU Unboxing http://www.youtube.com/watch?v=e4TSKZYxkJY Full HD of Swan Diving https://www.youtube.com/watch?v=KdaNtzuz_H0 Optical and Digital Zoom with stabilization SX50 comparison
Просмотров: 27876 catsclouds
ck tig torch with flex hose unboxing
 
05:18
My hands look pretty old huh? I should clip my nails for these HD videos too. I got this torch last month never had a chance to look at it. This a unboxing video of a ck worldwide tig welding torch. It's a #17 torch with the superflex hose. The hose is nice. Its really flexible vs the regular rubber hose. I bought a Safe-Loc connector from ck as well. That piece is nice too. I wasn't really sure how to open and close it but you can see me fidget with it and it comes together. This torch has a 25 foot cable length and a flex head. The part number for the torch is is CK17-25-RSF FX and the part number for the dinse connector is CK SL2-35. I also put a gas lens on it and #7 cup
Просмотров: 7432 catsclouds
Everlast Powertig 185 Tig welding Machine Unboxing
 
11:17
I put the ground and torch in opposite connectors by mistake, wasn't really paying attention for video. Everlast power tig
Просмотров: 6332 catsclouds
Cat video with Lumix DMC FZ70
 
01:41
Click 1080P for best quality Feral Cat (born on the streets) video taken with DMC FZ70 / FZ72 with manual focus
Просмотров: 9545 catsclouds
How to remove a Acura or Honda Trailing arm bushing
 
00:32
How to remove a Acura or Honda Trailing arm bushing. This bushing is from a 1996 acura Integra rear trailing arm. Hammer from the back to the front, the bushing is not meant to come out from front to back. Use a light hammer like a ball peen hammer that you can give quick taps or wacks. Sometimes using a big sledge hammer doesn't work as well as you can't build up the speed to wack the part and you end up just pushing against it. If there is a lot of rust you could try wd40 but this one in the video was as rusted as it gets and still came out without a problem. No trailing arm bushing x-tractor required. This will work on all honda acura models integra civic prelude accord
Просмотров: 10704 catsclouds
Panasonic  Lumix DMC-FZ70 unboxing
 
04:31
2013 Panasonic Lumix DMC-FZ70 camera unboxing fz70 fz72 fz200 16.1MP
Просмотров: 37670 catsclouds
Warning about Advair Diskus for people with Asthma and Allergies
 
00:24
This is just a warning for all the people who have asthma AND allergies to milk. I have severe asthma and I have anaphylactic allergies to Milk. I was taking Advair Diskus on and off and every time I would wheeze right after taking it. Trusting my doctor I never thought it could be my medication making me wheeze. Then one day it clicked in my head to check the information in the box and there it said it had milk protein. I called the Pharmacist and she was shocked and had no idea. Then she advised me the inhaler didn't have the milk protein. We switch to that and I had no problems. So if you are allergic to milk , eggs , fish , nuts and are taking advair diskus you might want to check that out if you didn't know.
Просмотров: 1624 catsclouds
Lenovo G580 Laptop  i5-3230M 2.6GHz UNBOXING
 
04:58
Unboxing Lenovo G580 Laptop / notebook Manufacturer Part Number: 59359084 intel i5-3230M 2.6GHz cpu 500GB HD / hard drive 4GB DDR3 Ram / memory color - brown /dark brown /chocolate display size 15.6" Intel HD Graphics 4000 model name 20150 Manufacturer Part Number: 59359084 Windows 8 64 bit
Просмотров: 78106 catsclouds
Polar H10 heart rate monitor review
 
14:39
this is the Polar H10 heart rate monitor. it conects to your phone via bluetooth and through a polar App you can log your activities and various data points like speed,heart rate,distance,date and even location. I was having a really high heart rate that is causing a problem when I try to ride my bike so I bought one so I could see what exactly is happening. It seems very accurate and repeatable. I believe it is the new version of the H7 monitor. I used another program to overlay the speed and heart rate data over the video. The data can be downloaded from the polar flow webside
Просмотров: 4892 catsclouds
Runva 3.5P 3500 lb Winch
 
07:32
This is a unboxing of a Runva 3.5P 3500 lb ATV Winch. Bought this online from ebay Name: Runva 3500lb 12v ATV Winch (Super Deluxe) Model Number: Runva 3.5P 12V Rated Line Pull: 3500lb (1588kgs) Single Line Pull Rated Motor: Permanent Magnet 12V 2.4kw/3.2hp Gear Reduction Ratio: 170:1 Cable (Dia. x L): 7/32" x 42' (5.4mm x 12.8m) Drum Size (Dia. x L): 1.46" x 3.15" (37mm x 80mm) Mounting Bolt Pattern: 3.0" x 4.87" (79 x 124 mm) 4-M8 Warn Standard Overall Dimensions: 13" x 4.6" x 4.4" (L x W x H) Interchangeable: Warn 2000lb/2500lb/3000lb ATV Winch (100% Fit) Power In/Out, Winch Pulls In Both Direction Winch Pulls Smoothly In Water / Snow / Mud Free Spooling Clutch Automatic Braking Action Full Metal Internal and External Interchangeable With Warn 2000lb/2500lb/3000lb ATV Winch
Просмотров: 15562 catsclouds
temporary fix hole in winter jacket with tape
 
04:45
fix your nylon winter coat jacket with duct tape. quicker than sewing with needle and thread but can always do that later. temporary fix not sure if water will make it come off but more concerened with cold weather don;t have too much rain here to get it wet.
Просмотров: 31501 catsclouds
Panasonic FZ70 / FZ72 winter driving - Video at night
 
09:07
Click 1080P for best quality. Panasonic lumix dmc-fz70 or FZ72 mounted on windshield recording video of snow fall driving down Yonge Street in Toronto Canada. The camera is in movie mode and the focus is set to manual because the auto focus kept adjusting on the snow falling on the windshield. I don't recommend this as a dashcam as it is too heavy , this was just an experiment to see how the camera records the winter low light driving conditions.
Просмотров: 1309 catsclouds
Canon Powershot ELPH 360 HS unboxing
 
09:26
This is an unboxing of the Canon Powershot HS compact point and shoot camera. Next week I hope to have a review and some footage from it for you. It is an expensive camera but I really needed a new one and my old camera was a Canon 300HS which finally broke.
Просмотров: 1625 catsclouds
Schwinn Pharos helmet unboxing
 
11:24
I bought this Schwinn Pharos helmet hoping to use it as a skateboard helmet but after reading about the difference in certifications for helmets which I explain in the video I am not sure it makes the best helmet for skateboarding. So I may have to get a different one. It apparently is made more for bicycling or rollerblading where multiple impacts to the head do not occur. It has an adjustable headband inside so it can easily fit different head sizes.
Просмотров: 419 catsclouds
heated pet water dish bowl
 
02:39
heated pet water dish that turns on and keeps water from freezing , I will use for the outdoor cats. It cost $25. I cannot leave water out in my location as it turns to ice in an hour during the winter. I have not tried it yet though. It is made by Farm Innovators unboxing
Просмотров: 1832 catsclouds
stray cat and dog feeder / water bowl from plastic bottles
 
07:59
Here is one way to make a cheap/free feral / stray cat and dog feeding station for free. This is made with trash plastic bottles,some string and scissors or a knife. Please clean up the little plastic bits you do cut so animals like birds don't eat it, also please be careful , don't cut yourself. This is a cat feeding dish made from a 2 litre plastic bottle and some string to tie it to a fence to hold it up. I was having trouble cutting the holes in the back of the bottle and I used a shirt inside to stop it from getting crushed and it worked as you can see. He aquí una manera de hacer que un gato y perro estación barato / gratis feral / perdida de alimentación de forma gratuita. Esto se hace con las botellas plásticas de basura, una cuerda y unas tijeras o un cuchillo. Por favor, limpiar los pequeños trozos de plástico te cortarán para animales como los pájaros no comen, también, por favor tenga cuidado, no te cortes. Este es un plato gato alimentar a partir de una botella de plástico de 2 litros y una cuerda para atarlo a una cerca para sostenerla. Yo estaba teniendo problemas para cortar los agujeros en la parte posterior de la botella y usé una camisa interior para evitar que se rompan y funcionó como se puede ver.
Просмотров: 60892 catsclouds
Lenovo G500 laptop render test
 
04:50
Lenovo G500 laptop render test rendering / saving an HD 1080P video using sony movie studio this g-series laptop computer has an intel i5-3230m processor and 4 gig ram running windows 8
Просмотров: 2660 catsclouds
friendly feral kitten
 
01:47
friendly feral kitten cat. He has 2 sisters and a mom and they are not friendly but he is. They were all trapped ,fixed and taken off the street except the mom who was just too scared so she was fixed and released. I first saw them roaming the street and then put out some cat food and they started coming around.
Просмотров: 556 catsclouds
mini lathe boring bars
 
03:27
I know i sound slow lol I don't really talk on videos so i'm not used to it lol. I'm obviously not a machinist and just learning as I go. This just a video of mini lathe boring bars, I feel the best one is the tcmt carbide boring bar, there is too much tool flex, carriage and tool post flex I find with this HSS boring bar from what I found on aluminum. The carbide bar with the insert was a lot stiffer leaving the only flex in the mini lathe parts. My experience is from using a 7x12 lathe and a A2Z quick change tool post.
Просмотров: 11237 catsclouds
Rubbermaid Storage Shed
 
04:21
Hi this is a Rubbermaid shed bought from Homedepot and it has been in this same spot for about 10 years. This shed has survived -30 winters with a foot of snow on top, winds and rains, the only damage appears to be warping of the roof edges from the sun but they can be pulled down into place , or screwed. It has been well worth it as you can see the amount of stuff inside. The wood base frame has only fallen apart in the past year, ripped off one side and put cinder blocks under as the wall is made up of 2 panels and one panel was sliding down as there is nothing supporting them once the wood rotted away. I would suggest if you use a wood base frame make sure you have beams running directly under the joints of the floor or walls where they come together with those connectors. If the wood does rot away then those big beams even rotted will still offer some support. I think putting wood planks under the base frame might be a good idea to help spread out the weight.
Просмотров: 8521 catsclouds
How to use a dolly to move a heavy TV
 
09:44
Here I use a Dolly cart to move a very heavy Sony TV. This tv is supposed to weight 90 LBS and I only weigh 120lbs. There is no way one person could lift this dolly down the stairs and doubtful 2 people could do it if they are weak as I am lol. The dolly is very very helpful , especially if you do things alone and it is reasonably priced. Move everything from tv,furniture,appliances to other equipment. The dolly has other names such as hand cart,hand truck,dolly cart.
Просмотров: 16345 catsclouds
lenovo g505 render test and start up time
 
09:05
Click 1080P for best quality. Unboxing video http://www.youtube.com/watch?v=Uyeeg5uKY-s This laptop the g505 with AMD E1-2100 1 ghz 2gb ram is very slow. To render 1 minute of HD 1080P video using Sony Movie Studio takes about 14 min. It even had trouble opening internet explorer. Cannot recommend sorry. AMD E1-2100 1 ghz 2 GB DDR3 Ram Lenovo G505 laptop 15.6 Inches screen 320 GB hard drive AMD Radeon HD 7310
Просмотров: 4044 catsclouds
Lenovo G500 laptop
 
05:41
lenovo g500 laptop unboxing intel i5-3230m 2.6 ghz overclock g505 4 gig ram memory g series 15.6" screen Intel HD Graphics 4000
Просмотров: 65937 catsclouds
Panasonic Lumix FZ70 / FZ72 menu options
 
06:03
Panasonic Lumix FZ70 / FZ72 menu options Cycling through the menu options of the camera from Intelligent auto to manual and showing the live mode with some short reply of video on the lcd screen.
Просмотров: 57955 catsclouds
Lumix FZ70 / FZ72 usb connection and battery
 
02:32
Just a video of the FZ70 USB / HDMI connections and battery door with spot for ac power adapter I believe
Просмотров: 3227 catsclouds
Pulse Oximeter Review CMS50D+
 
10:32
This is a review of the Contect CMS50D+ Pulse Oximeter
Просмотров: 39 catsclouds
black squirrel chirping
 
01:46
Squirrel chirping and communication. The Black Squirrel I think is saying there is danger nearby and warning others. There was a cat in the area. The weather is very cold so you see the Squirrels hot condensation breath coming out of his little mouth. Fur is for animals not humans so remember to go fur free. This video shot with a Canon PowerShot SX60 HS
Просмотров: 2199 catsclouds