На главную
Результаты поиска “Plans to build work table”
The PERFECT Woodworking Workbench // How To Build The Ultimate Hybrid Workholding Bench
 
13:10
How to make the PERFECT woodworking workbench! This massive hybrid bench (part French Roubo, part German Holtzapffel, and part English Nicholson) gives you the ultimate in work holding abilities! "WORKBENCH PLANS" https://www.thirdcoastcraftsman.com/shop "WORKBENCH LUMBER PACKS" http://theworkbench.com/ Hardwood lumber packs for this workbench are available through L.L. Johnson Lumber/Johnsons Workbench in Charlotte MI. Packs can be picked up in store or delivered to your house anywhere in the US.** They will mill the lumber for FREE, and if you order before 9/9/2018 you will get an additional discount on the lumber. They straight-line rip one edge, mill flat and smooth both faces so all you have to do is follow the plans and rip the boards to proper width, cut to length, glue up, cut joinery, and assemble. No further milling should be needed. OPTIONS: HARD MAPLE 6ft - 7ft Bench ~ $907 8ft - 9ft Bench ~ $1063 RED OAK 6ft - 7ft Bench ~ $698 8ft - 9ft Bench ~ $822 WHITE OAK 6ft - 7ft Bench ~ $1107 8ft - 9ft Bench ~ $1300 **Prices do not include shipping or tax as those will vary from location to location. Lumber pack prices may also vary. TO ORDER OR TO RECEIVE MORE PRICING INFO: ~~~ Email Adam at adam@theworkbench.com ~~~ or call (517) 543-1660 "VERITAS TWIN-SCREW VISE" http://www.leevalley.com/us/Wood/page.aspx?p=45114&cat=1,41659 "VERITAS QUICK RELEASE VISE" http://www.leevalley.com/us/Wood/page.aspx?p=67755&cat=1,41659 "VERITAS BENCH DOGS, PRAIRIE DOGS, ACCESSORIES" http://www.leevalley.com/us/Wood/page.aspx?cat=1&p=41637 "HOLD FASTS" https://www.toolsforworkingwood.com/store/dept/TL/item/MS-HOLDFAST.XX "MERCHANDISE" https://www.thirdcoastcraftsman.com "MY WEBSITE" https://www.thirdcoastcraftsman.com "MY FAVORITE TOOLS" https://www.thirdcoastcraftsman.com/favorite-handtools "SUPPORT ME ON PATREON AND GET COOL REWARDS!!!" https://www.patreon.com/thirdcoastcraftsman Instagram -- https://www.instagram.com/thirdcoastcraftsman Facebook -- https://www.facebook.com/ThirdCoastCraftsman Videography and Editing Marlon J Torres https://www.instagram.com/marlon.joaquin.torres/ marlonjt2192@gmail.com DISCLAIMER: Woodworking and the use of power and hand tools can be extremely dangerous. You are responsible for understanding the safe use of your tools and techniques. Your safety is YOUR responsibility, I accept NO responsibility or liability for any injuries, accidents, death occurring to you or others if you attempt to do the things that I do or use advice that I give.
Просмотров: 570076 Third Coast Craftsman
How To Build a Simple Cheap Work Bench
 
04:14
Build a simple workbench for around $60 in less than an hour! This is a great addition to your garage or workshop and can me made with simple tools. Makes working on car parts and DIY projects much easier! The lengths you'll need are: 1 X Bench top (1200mm X 600mm) 2 X 1200mm (Bench frame) 2 X 540mm (Bench Frame Ends) 4 X 980mm (Legs) Choose your own lengths based on desired height 2 X 600mm (Leg Supports) There are loads of really great workbench designs out there but this is a nice simple design for doing DIY projects. You can adjust any of the sizes and lengths to create a custom bench for your own workspace. You can also simply replace the bench top when it gets worn out and if you're budget allows you can use a nice piece of hardwood. Keep in mind that wood may not be perfectly straight so choose carefully at the shop. Glue also helps to make the whole thing stronger. I'm using this bench as part of a larger bench and mounting it to a wall and supports but if you're using screws only on the legs install them diagonally. We were sent an email from a young MCM fan asking how to make a cheap, simple workbench. We're not carpenters by any stretch of the imagination but we hope this helps you get started on your own workbench! Song is 'Jimmy Rabbit feat. Mammals' by Moog Direct Download: http://www.mightycarmods.com/collections/music iTunes: https://itunes.apple.com/au/album/jimmy-rabbit-feat.-mammals/id553018843 Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics (or carpenters!) We like to make interesting car mods and projects and show you how we've gone about it, but we can't promise that anything we show you will work for your particular project, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic or carpenter if you are in any doubt. This video has no affiliation with Ryobi. They are just the tools I own.
Просмотров: 1268111 mcmtv2
How to Build a Professional Style Workbench
 
14:02
This video serves as a step by step how-to guide to building a professional style workbench for your woodshop or workshop. If you have any questions about the build, ask them in the comments section and I will answer them as soon as possible. I've had several people ask for a materials list, so here it is. This is for 1 - 7' x 37" workbench. 3 - 4"x4"x8' 7 - 2"x4"x8' 6 - 2"x6"x8' and a box of 2 1/2" or 3" screws. I hope this list helps those of you planning to build this. I'd love to see your finished product, so send me pictures via DM on Instagram (WV_DIY). Let me know if you have any questions. Thanks for watching! LIKE! SUBSCRIBE! FOLLOW ON INSTAGRAM! WV_DIY
Просмотров: 1475620 WV DIY GUY
Ultimate Outfeed/Workbench Storage Build
 
08:38
In this video i give my outfeed table a major upgrade with some handmade storage drawers and slide out drawers for my consumable organizers. Check it out! PURCHASE THE FULL PLAN HERE! http://bit.ly/Outfeed_Plan FULL BLOG AND PLAN Johnmalecki.com/outfeed-table-storage SNAG A SHIRT OR HOODIE MERCHANDISE !!!! http://bit.ly/Builder_Merch https://www.woodcraft.com/ Milwaukee Job Site Tool Box Organizer http://amzn.to/2DHb9P1 KREG Drawer Slide Jig http://amzn.to/2DWV2jF My Top Tools and Product Affiliates Woodworking Tools - https://kit.com/JohnMaleckiBuilds/woodworking Metalworking Tools - https://kit.com/JohnMaleckiBuilds/metal-working-tools Favorite Finishes - https://kit.com/JohnMaleckiBuilds/finishes My Camera Gear - https://kit.com/JohnMaleckiBuilds/camera-gear ----------------------------------------------------------------------------------- Follow me on Social! Instagram: http://www.Instagram.com/John_Malecki Facebook: http://www.Facebook.com/JohnMaleckiBuilds Twitter: http://www.Twitter.com/John_Malecki Website: http:// www.JohnMalecki.com ----------------------------------------------------------------------------------- Send me your stickers John Malecki 230 Sweetbriar St Pittsburgh PA 15211
Просмотров: 190198 John Malecki
Welding Table / Workbench Build    -    How To
 
13:40
Building a Welding Table / Multifunctional workbench for the shipping container shop. I plan on using this welding table/workbench for more than just welding. It will likely be a multipurpose workbench for many of my projects and will help out a lot for the next few shipping container shop additions! Please let me know if you have any questions:) Big thanks to my local Industrial Metal Supply for partnering with me on this project and supplying some of the steel for this build! Here is a link if you want to see if they have a store near you! https://www.industrialmetalsupply.com/ Music in this video sourced from the youtube audio library. credits are as follows: Plastic or Paper - by Wes Hutchinson Subscribe to homesteadonomics: http://bit.ly/2trs1Iz Follow homesteadonomics: Facebook: https://www.facebook.com/homesteadonomics Instagram: https://www.instagram.com/homesteadonomics/ If you guys like the videos I make and would like to help support the channel at no additional cost to you. Please consider doing some of you Amazon shopping through this link. I may receive a small commission for any items you purchase. It’s greatly appreciated ☺ http://amzn.to/2rGhp7i Business Inquiries: kangaroojoe@msn.com ----------- DIY, Gardening, Outdoors, Home Economics, Preparedness, Permaculture, etc,. If you have any questions or business inquires feel free to email below or if you prefer, you can send old fashioned mail to this address:) Homesteadonomics HC 70 Box 4770 Sahuarita AZ 85629 ----------- Tags: homesteadonomics, homesteading, diy build, building projects, diy crafts, crafting ideas
Просмотров: 887283 homesteadonomics
DIY Folding Mobile Workbench
 
09:52
Small work space? No problem! Learn how to make a simple, folding mobile workbench from inexpensive materials found at any home store. Full building plans and cut lists: https://gum.co/folding-workench-plans *This post is sponsored by The Home Depot. https://www.pneumaticaddict.com/2018/03/folding-mobile-workbench-video-tutorial.html Facebook: https://www.facebook.com/PneumaticAddict Instagram: https://www.instagram.com/pneumaticad... Twitter: https://twitter.com/pneumaticaddict Pinterest: https://www.pinterest.com/pneumaticad... Blog: http://www.pneumaticaddict.com/ Big thanks to @ewood_q8 for the idea!
Просмотров: 229510 Pneumatic Addict
HD Workbench - How To Build It - DIY Customized
 
05:55
I have built dozens of heavy-duty workbenches over the years to support my Robotics Company. This video gives you an overview of how to build your own Heavy-Duty Workbench. This Workbench is estimated to hold up to 600 pounds. Follow along as I show you the steps. Chris Rogers is a robotics expert and president of Inspectorbots. "We build a range of custom and stock robotic platforms for a wide range of industries". For more info please visit us at http://www.inspectorbots.com or write: info@inspectorbots.com I am selling the plans for this workbench for USD$20 E-mail me if you want them.
Просмотров: 565202 www.Inspectorbots.com
ULTIMATE T-Track Assembly & Outfeed Table / Workbench with Systainer Storage | How To Build
 
19:39
Plans: https://craftedworkshop.com/store/ultimate-t-track-assembly-outfeed-table-with-systainer-storage I'll show you how to build this ULTIMATE assembly / outfeed table and workbench featuring a t-track top and Systainer storage. It's got tons of other features, including an air hose reel, screw organizers, and much, much more. ► Support This Week's Sponsors: Purebond Plywood: http://bit.ly/purebond Rockler Woodworking & Hardware: http://bit.ly/rocklercrafted ► Materials Needed For The ULTIMATE T-Track Assembly & Outfeed Table (affiliate) (5) 4’ x 8’ sheet of ¾” Purebond plywood: http://bit.ly/purebond (1) 4’ x 8’ sheet of ½” Purebond plywood: http://bit.ly/purebond (1) 4’ x 8’ sheet of ¼” Purebond plywood: http://bit.ly/purebond (3) 1’ x 2’ x 6’ Hardwood (for trim) : Local Home Center (1 Gallon) Wood Glue: http://amzn.to/2h26xJj (~200) 1” Brad Nails: http://amzn.to/2h97qDG (1 lb) 1 ¼” Screws: http://amzn.to/2is1Icz (~200) 1 ¼” pocket screws: http://amzn.to/2gZDjLi (4) 4 ft. Universal T-Track: http://amzn.to/2zd5DCp (3) 3 ft. Universal T-Track: http://amzn.to/2zhhQaX (12) T-Track Intersection Kit: http://amzn.to/2ztTETL (7) 20” Drawer Slides (for drawers): http://amzn.to/2zv6dON (9) 14” Drawer Slides (for Systainer Trays): http://amzn.to/2AhcNp1 (1) Workbench Caster Kit: http://amzn.to/2ha5b2V (1) Quick-Release Workbench Caster Plates: http://bit.ly/2hBMqm5 (2) Heavy Duty Lifting Leveler : http://amzn.to/2h9tAFO (1) 50' x 3/8'' Hybrid Air Hose and Reel: http://bit.ly/2xWPjnG (2) Stack-On DCY-10 Deep Cup Parts Storage Organizer: http://amzn.to/2xYaAxv ► Tools Used On The ULTIMATE T-Track Assembly & Outfeed Table Rockler Universal Drawer Slide Jig : http://amzn.to/2xWaeay SawStop PCS 1.75-HP Professional Cabinet Saw : http://amzn.to/2aqqRyn Festool Kapex Miter Saw : http://bit.ly/festooldealers Festool OF-1400 Router : http://bit.ly/festooldealers Mirka Deros Sander : http://amzn.to/2qXGhHH Drill : http://amzn.to/2zuxfpj Parallel Clamps : http://amzn.to/2zgQtdS ¾" Straight Bit : http://amzn.to/2zbWZ6W Fuji Q3 HVLP Sprayer : http://amzn.to/2zfvw38 Self Centering Drill Bit : http://amzn.to/2gZBRsk The Poplar Shop's video on building the Systainer trays: https://www.youtube.com/watch?v=ijrgA... ► SUBSCRIBE : https://goo.gl/V5gcNJ ► SUPPORT US : https://goo.gl/pmmpTQ ► FOLLOW CRAFTED WORKSHOP! FACEBOOK: http://facebook.com/craftedworkshop TWITTER: http://twitter.com/craftedworkshop INSTAGRAM: http://instagram.com/craftedworkshop PINTEREST: http://pinterest.com/craftedworkshop
Просмотров: 483292 Crafted Workshop
How to Build a Cheap and Strong Workbench with FREE plans
 
07:46
In this video I show how I built a very simple, cheap and strong workbench out of 38x63mm (2x3"), 38x89mm (2x4") and 18mm (3/4") Plywood. FREE plans can be found here: https://drive.google.com/file/d/0B1KlroDGOwxVY3d4UHB0WHIydkE/view?usp=sharing
Просмотров: 30291 Happy Wife Happy Life
Building 4 in 1 Workshop (Homemade table saw, router table, disc sander, jigsaw table)
 
13:12
All in one.! Table saw, router table, disc sander and jigsaw table.. Tüm atölye tek bir makinada birleşti.! Tezgah testere, freze tezgahı, disk zımpara makinası ve dekupaj testere tezgahı.. Box dimensions: 54x32x88 and table 65x98 cm. Plywood thickness of box 10 mm table 18 mm. Disc sander diameter 180 mm Kutu boyutları: 54x32x88, tabla 65x98 cm. Kutu kontrplak kalınlığı: 10 mm tabla kalınlığı: 18 mm. Disk zımpara ölçüsü: 180 mm
Просмотров: 6690020 Gökmen ALTUNTAŞ
HOW TO MAKE A ROLLING TABLE SAW AND JOINTER WORK BENCH DIY
 
17:59
Watch me build a rolling work bench that can house my table saw and work bench and give me a ton of garage storage. Be sure to leave a comment and subscribe if you like what you see. Thanks! Caleb Add me on Instagram and Facebook: @secondsonwoodworks Check out website: secondsonwoodworks.com Music: Always (Vlog Music) by Dj Quads https://soundcloud.com/aka-dj-quads Music promoted by Audio Library https://youtu.be/jIiE1ezj4cs ZenAware https://soundcloud.com/zenaware https://www.facebook.com/ZenAware-890... Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com/ Music promoted by Audio Library https://youtu.be/Vhd6Kc4TZls Buddha by Kontekst https://soundcloud.com/kontekstmusic Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/b6jK2t3lcRs And So It Begins by Artificial.Music https://soundcloud.com/artificial-music Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music promoted by Audio Library https://youtu.be/JpoEFiAJdxo BUILD SOMETHING COOL...
Просмотров: 176776 Second Son Woodworks
Building the ultimate ALL-IN-ONE woodworking station - PART 1
 
08:04
Building one workstation for all my most used equipment was tricky but with a lot a thought and good planning it seems like I'm on my way. The idea is to build one woodworking workstation to make the most of the small space I have available. On this station I'm planning on installing a table saw, miter saw, thicknesser and router table. I'm planning on adding centralized dust extraction to all the relevant equipment and a compressor to assist with clean up. I also plan on adding all my handheld power tools in drawers under the woodworking table with power points for easy and quick use. This is the first installment of my building the ultimate all in one woodworking workstation. In this video, I focus on getting the basic framework up onto its rolling chassis. From there I will post videos on each tool or piece of equipment I add to the bench. To support my channel - Check out our Woodshop Junkies merch on Teespring: https://teespring.com/stores/woodshop-junkies Dimensions for stage one of the all in one workbench are available at https://woodworkjunkie.com/building-a-all-in-one-woodworking-workstation-part-1-plans-with-video-instruction IMPORTANT - Disclaimer! All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk. Woodworking and the use of power tools can be extremely dangerous. The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owners manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Просмотров: 254571 Woodshop Junkies
DIY BUDGET FRIENDLY WORKBENCH (FREE PLANS)
 
05:48
Download the FREE plans: http://bit.ly/MFIworkbench Today I show you how to build a simple, cheap, and easy workbench for your shop using minimal tools. FOLLOW THE BLOG: http://www.mrfixitdiy.com SUBSCRIBE: http://bit.ly/1HmTBBx WATCH MORE MR. FIX IT: http://bit.ly/1DDVk99 PLANS & MERCH: http://www.mrfixitdiy.com/shop/ FOLLOW ME ON SOCIAL MEDIA: TWITTER: http://twitter.com/mrfixitdiy FACEBOOK: https://www.facebook.com/Mr.FixItDIY INSTAGRAM: http://instagram.com/mrfixitdiy PINTEREST: http://www.pinterest.com/mrfixitdiy PATREON: https://www.patreon.com/MrFixIt Special thanks to Kevin Joy for helping out with some camerawork and extra hands for the build.
Просмотров: 209047 Mr. Fix It
Homemade table saw with built in router and inverted jigsaw 3 in 1
 
14:59
Hi this is my take on a homemade table saw, router table and inverted jigsaw, I built all 3 into the same table to save on space I am very pleased with the results and would recommend making one yourself The table top is 100cm by 80cm, I didn’t use any specific measurements for the box I just built it round the tools. The tools I used are a Black and Decker circular saw KS64, a Bosch router POF 500A, and a Black and Decker jigsaw KS 633E During the build and filming allot of the cutting gluing and general preparation was done off camera to speed up the video 00:00 Intro 00:27 Starting the build 01:48 Building the main box 02:51 Fitting flush rulers 04:40 Fitting the inverted jigsaw 06:13 Fitting the router 08:57 Sorting out the electrics 09:54 Making the internal storage compartments 10:43 Making the fence and runners 12:10 Fitting the fence 14:25 Testing My camera gear Canon G7X http://goo.gl/hElOVh Canon 70D https://goo.gl/d8Rilm Rode VIDEOMIC PRO https://goo.gl/9l8fvX Rode Deadcat Windshield https://goo.gl/tHTncw Canon 10-22 lens https://goo.gl/A81rjM Canon 18-200 lens https://goo.gl/MOInDa GoPro HERO4 black https://goo.gl/dc8wez Joby GorillaPod https://goo.gl/Tz9aDn XCSOURCE tripod https://goo.gl/nhOQmX "Pulse" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Просмотров: 8610474 Sean Beardon
BUILDING A STRONG WORKBENCH PT 1 OF 4
 
07:43
When we moved to our home in 1978 I made this same workbench. It has held up well. This workbench is a general all purpose workbench. It is built sturdy to last years and will not move when you use it. You can secure a heavy duty vice and the table will stay put when you use the vice. With the pegboard back to be added later you can have all of your tools handy to work on any project. From building bird houses and feeders, repairing a chain saw, putting new handles on tools or overhauling a lawn mower engine.
Просмотров: 165687 navajopa31
A Simple 2x4 and plywood work table/bench You can build!!
 
07:00
A Simple 2x4 and plywood work table/bench You can build!! IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item=201012656910&rt=nc&_trksid=p2047675.l2562 For finished pens made by Chad Schimmel visit www.impeccablepen.com Be sure and subscribe for new videos every Friday. Music By Call to Adventure Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ For other questions on pen making please post a comment or email chadschimmel@gmail.com For business inquires please email chadschimmel@gmail.com
Просмотров: 141307 Chad Schimmel
How to make a Work Table - DIY
 
04:34
This is a really simple table, the only thing you need are 2x4 lumber. It is cheap and easy, but really steady. I make it only with the pocket hole jig and wood glue (links are bellow) and the plans will be in my site soon. As I said in the videos you just need nine 2x4, but you can change the size of the table if you want, of course the amount of wood will change. I hope you enjoy the video and it inspire you to start making stuff. ---------- PLEASE SUBSCRIBES AND LIKE THE VIDEOS. Check out some of my other projects: - How to make a coffee table: https://www.youtube.com/watch?v=1ctBtKLd5mM - How to make reclaimed wood shelves: https://www.youtube.com/watch?v=veTxbWuDFFs - How to paint an old furniture: https://www.youtube.com/watch?v=i2bppkt4Za8 Thanks to TAMBOUR for the music, check his Soundcloud: https://soundcloud.com/letambour ---------- PRODUCTS: Wood Glue: http://goo.gl/c6s1F9 Pocket Hole Jig: http://goo.gl/B5pW2O 2x4 Lumber: http://goo.gl/3DpTYe (We need to understand than the 2x4 actually measure 1.5 by 3.5 inches, WHY? I don't know) https://www.youtube.com/makingstuffco Follow me on Instagram: https://www.instagram.com/makingstuff.co website: http://makingstuff.co/ ---------- Thank you for watching! ----------
Просмотров: 16464 Making Stuff
Build A Woodworking Workbench for $110 USD
 
21:40
I finally got around to building a nice workbench. Plans and more info here: http://jayscustomcreations.com/2016/01/build-a-woodworking-workbench/ For Business Inquiries Please Email: marketing@jayscustomcreations.com Tools in my shop (If you buy through these links it supports my channel! Thank you! ): Bandsaw - http://amzn.to/2gMHrjd Bevel gauge (t-bevel) - http://amzn.to/2eYLB2N Bluetooth adapter - http://amzn.to/1GDYgFl Dado blade - http://amzn.to/210w6ex Dewalt planer - http://amzn.to/1IGqVoz Dewalt sander - http://amzn.to/1IGt0B6 Dewalt countersink - http://amzn.to/1ThxZQi Dovetail gauge - http://amzn.to/2bJpxIi Eclipse quick release vise - http://amzn.to/1PUkyEW Engineer square - http://amzn.to/2bqS0lA Festool Domino - http://amzn.to/1IGrQ8u Forstner bit - http://amzn.to/2fMph1z Glu-Bot glue bottle - http://amzn.to/1LrKulZ Gyokucho 372 japanese pull saw - http://amzn.to/1TgnE9i Irwin Marples 10" blade - http://amzn.to/1klkIIr Kreg K4 - http://amzn.to/1V4LTGM Kreg DB210 pocket hole machine - http://amzn.to/1pFvmwU Kreg Mini - http://amzn.to/1phH3cQ Marble router bit or drill bit - http://bit.ly/1HIAZCA Megapro NAS Driver - http://amzn.to/1OH8H8v Milwaukee plunge router - http://amzn.to/2gSr5Ci Mp3 earmuffs - http://amzn.to/1RF5CZq Narex marking knife - http://amzn.to/2ciT7K2 Ridgid miter saw - http://amzn.to/2h0Xf2s Rustic pine Briwax - http://amzn.to/1EnC0Jg Ryobi 18v brad nailer - http://amzn.to/1Q3zZdG SawStop titanium series blade - http://amzn.to/1OQUXbr Scraper BAHCO - http://amzn.to/1PTR4Ie 12" speed square - http://amzn.to/1QY7BKg T-bevel (bevel gauge) - http://amzn.to/2eYLB2N Table top hold down clips - http://amzn.to/1MeGnfx Tudor brown briwax - http://amzn.to/1TnDPxC Wax brush wheel for drill - http://amzn.to/1PtRYLi Wood glue - http://amzn.to/1lZOwfc Woodriver #4-1/2 - http://amzn.to/24pY95R Woodriver #62 - http://amzn.to/22aF3F0 Want to help support what I do? Here's what you can do: Buy a Plan: http://goo.gl/L7wNIF Patreon: https://www.patreon.com/jaybates Amazon Affiliate: http://amzn.to/2ch5gLi Mailing Address: PO Box 2268 Starkville, MS 39759 New vlog video after every project: http://www.youtube.com/jccshorts Social links: Twitter https://twitter.com/JayBates86 Facebook http://www.facebook.com/jayscustomcreations Instagram= http://www.instagram.com/jaybates86 ---------- Music: http://audionautix.com/
Просмотров: 1921649 Jay Bates - Woodworking Videos
Designing and Building a Mini Workbench
 
16:53
A tabletop workbench is a superb way to bring smaller work close to your eyes, and often eliminates the back strain and fatigue that are caused by bending over a lower work table. This version is appropriate for a wide variety of smaller workshop tasks. I show the installation of a serious front vise, and demonstrate some custom accessories that simplify and expedite many common woodworking processes. For the link to the Fine Woodworking video, see https://www.youtube.com/watch?v=CIguWLiQHOs For the link to the Yost front vise shown in the video, see https://www.amazon.com/dp/B01M60Q4NN/ref=biss_dp_t_asn For plans for this workbench, see my website: https://psullivancarmel.wixsite.com/templates
Просмотров: 260696 Patrick Sullivan
DIY Folding Workbench - With Easy to Follow Plans to build a sturdy space saving workbench
 
09:40
This folding workbench is a great addition to any garage or craft area with limited space.  In it's folded position it only takes up 6" of floor space.  When set up it's a rock solid 32" deep workbench ready for your next DIY project.  The best part is you can build it on a Saturday for less than $100.00 Purchase the Plans On Etsy: https://www.etsy.com/listing/566816326/diy-folding-workbench-plans-easy-to?utm_medium=SellerListingTools&utm_campaign=Share&utm_source=Raw&share_time=1513571400000&utm_term=so.slt Full Article: https://wp.me/p5Fv5T-JT I was hired by a nice couple in College Station to help organize there garage. They asked if I could install shelving and also build a folding workbench like they’ve seen on Pinterest. I’m a carpenter who loves building unique woodworking projects so I get really excited whenever I get a call that starts with “Hey, I found this thing on Pinterest, can you built it?”. SketchUp is such a valuable tool for woodworkers, carpenters, and remodelers.  Being able to build and modify custom cabinetry or woodworking projects digitally gives your customers a much better finished product and allows you as the contractor to more accurately price a job. I finished the workbench top with two coats of Minwax Polyurethane for Floors.  This product is very durable and makes a great top coat for high use areas like wood counter tops, work benches, tables, and...um...floors.
Просмотров: 8368 Dailey Woodworks
Ultimate Workbench + 10 Shop Storage Solutions
 
11:59
Big thank you to Rockler (http://bit.ly/2oWrisB) and Purebond (http://bit.ly/2KFEgoV) for sponsoring this video. Link to Plans: http://bit.ly/2LdT3Z0 Storage Bins Diagram: http://bit.ly/2ISiMb8 Patreon: https://www.patreon.com/user?u=257047 Instagram: https://www.instagram.com/wilker_dos/ Website: https://www.wilkerdos.com/ Want to support me? Support the companies that support me. Triton Tools: http://bit.ly/2jaC0dD, ISOtunes: http://bit.ly/2rVobCD, and Titebond: http://bit.ly/2zicV9i Things I Used in This Project: Triton Track saw: http://amzn.to/2qmTytb Purebond Plywood: https://thd.co/2LfF6cY ISOtunes Bluetooth Hearing Protection: http://amzn.to/2pEjNtv Jobsite Saw: https://amzn.to/2rcHuYP Triton SuperJaws: http://amzn.to/2zYTWSv Titebond Original Wood Glue: http://amzn.to/2hMkdZw Glue Brush: http://bit.ly/2pJGNrU Triton Drills: http://bit.ly/2qqO4sK 18 Gauge Brad Nailer: https://amzn.to/2IvOziJ Rockler Shop Block: https://amzn.to/2GzFcZt Rockler Bandy Clamps: http://amzn.to/2iMIhvF Rockler Bench Cookies: http://amzn.to/2xnZC7d Miter Saw Stand: http://bit.ly/2pwceVy Miter Saw: http://amzn.to/2tF5Azc Titebond Thick and Quick: https://amzn.to/2KflUe0 Rockler Quick Release Casters: http://bit.ly/2IBbaGC
Просмотров: 1308744 April Wilkerson
Simple Modular Work Tables (WITH MAGNETS!) // Woodworking How To
 
15:40
For my new shop, I made some simple, sturdy and super modular work tables WITH MAGNETS!!! Tables, UNITE! Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 TOOLS & SUPPLIES: Digital Plans - https://www.iliketomakestuff.com/product/modular-work-table-digital-plan/ http://amzn.to/2vGocPf - Neodymium magnets http://amzn.to/2vXm6sC - Gas struts http://amzn.to/2w58tKf - Piano Hinge https://kit.com/iliketomakestuff/my-woodworking-tools https://kit.com/iliketomakestuff/shop-safety-gear It's finally time to start setting up my new shop! Everything is still shoved against the walls, mostly still in boxes and completely unorganized. As a first step towards making the space usable, I decided to build a work table. I debated about making one large 4x8 table that could act as an out feed table for my table saw. I was worried that such a large item would start to eat up my large open space as I really want to try to keep this shop as open and flexible as possible. On my Twitch livestream recently, I opened up the discussion for input about how to make a table more useful and modular. We had an AWESOME collaborative design session and eventually the project turned into tables, not just table.The idea we ended up with was multiple tables that could snap together (using magnets) to create a large 4x8 table when necessary, or split apart to be useful in different places or configurations.  They turned out to be really simple, really sturdy and super cool :) MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms
Просмотров: 908318 I Like To Make Stuff
DIY Fold down WORKBENCH
 
09:57
Ever wanted a workspace that's space friendly? Well in the video I showed how to maximize a simple workbench, making it multipurpose for many uses. Workbench plans https://gum.co/zbkAc View all my plans https://gumroad.com/diycreators ----------------------------------Material----------------------------------- (3) 2 by 4 Lumber (1) 3/4 in sheet of plywood (4) Hinge http://amzn.to/1Sr0z2l (2) Barrel Bolt http://amzn.to/2iKJiY8 (2) Shelf bracket https://goo.gl/4hm6ZM 1.5 in Screws for (attaching plywood to the 2 by 4) 3/4 in Screws for the hinge http://amzn.to/2vvLMzB 3.5 in Wood Screws for the 2by4 frame 3 to 4 in screw for wall mount Wood glue http://amzn.to/2gnijgE -------------------------------Tools used------------------------------------- Jawhourse Portable Material station http://amzn.to/2wkCTaS Dual Chucks Drill http://amzn.to/2xPgxMu Drill/ Driver combo kit: http://amzn.to/2xP6Ygu Self-Center bit for the hinge http://amzn.to/2xPd8gy Sawstop Table saw http://amzn.to/2iJMSBR Sander http://amzn.to/2wLpidT Chisel http://amzn.to/2wqkyY8 Counter sink bit http://amzn.to/2wV7LjD Find me on Social media Instagram: https://www.instagram.com/morediycreators/ Facebook: https://www.facebook.com/diycreators --------------------Camera and recording equipment I use ----------------------- Camera - http://amzn.to/2qTajaY Mic - http://amzn.to/2qTtAZO --------------------------------Limited Tools Videos -------------------------------- If you're new to woodworking with little to no tool check out my "Limited Tools Videos (For beginners)" https://www.youtube.com/playlist?list=PLE6IL_H-YxnztDZbRLT9ItW2J7q2ejT40
Просмотров: 263892 DIY Creators
New Shop Build: Part 6 - How to Build a Rolling Workbench
 
13:01
In this video I build two rolling workbenches that can be used as assembly tables, lathe tables, basic workbenches, or for rolling tool storage. These tables easily roll under other work benches to maximize space in your shop or garage. ORDER PLANS HERE: https://tommytompkins.com/product/tompkins-miter-saw-station-with-rolling-workbench
Просмотров: 418760 Tommy Tompkins
Build a Simple 2x4 Workbench
 
06:56
Go to http://lynda.com/april to get a free 10 day trial! A big thanks to Nick Ferry for doing the special effect at the end. ; ) For a written tutorial check out my blog at http://wilkerdos.com/2015/12/building-a-2x4-workbench/ My dad really needed a workbench for his garage and asked if it was something I wanted to build. : ) Of course I said yes. So here I show you how to build a very simple but sturdy eight foot workbench out of only 2x4s and plywood. I added pegboard only at the top because my dad wanted to have a space where he could reach the workbench surface from either side. However, you could very easily add a full sheet of pegboard instead and have it go all the way down to the workbench surface. Don't forget I have a set of plans, where I walk you through step by step, on my website if you want to build one! Follow me on Facebook at https://www.facebook.com/wilkerdos Patreon: https://www.patreon.com/user?u=257047 Instagram: https://www.instagram.com/wilker_dos/ Check out my awesome sponsor Triton Tools: http://www.tritontools.com/en-US Things I used: Circular Saw: http://goo.gl/SuokPY SuperJaws: http://goo.gl/xI6hnd Drill and Impact: http://goo.gl/cyoVeh Glue Bottle: http://goo.gl/8RTQdP
Просмотров: 1338358 April Wilkerson
DIY 2x4 Workbench for Under $100 | Modern Builds | Woodworking
 
16:10
Today on Modern builds, I'm making a woodworking workbench completely out of 2x4's! Materials (wood) for this project came in at just under $100, and the beauty of this project is that it doesn't take a shop full of tools. A circular saw, planer, and a table saw (optionally) is all you need! If you plan on building this project yourself, there will be plans on my website, linked below. Thanks to RZ Mask for sponsoring this video. Check them out at: https://rzmask.com/collections/rz-mask Use the code "modernbuilds" for 15% off! Stuff I used: Wood Glue: http://amzn.to/2E74mCe Clear Finish: http://amzn.to/2sg97nL Sketchup Tutorial for this build: https://www.youtube.com/channel/UChUu1WUKkMszsXDqVxl1GJA Other Bench Builds: https://www.youtube.com/watch?v=fg5qjed7u-k https://www.youtube.com/watch?v=SZGykd0ipkQ https://www.youtube.com/watch?v=pe-EjnrZJrg Written Article: http://www.modernbuilds.com/workbench ___ DONT FORGET TO LIKE COMMENT AND SUBSCRIBE. Subscribe: https://goo.gl/pgDSS8 ___ ADD ME ON: Instagram: https://goo.gl/UgEpJs | @modernbuilds Facebook: https://goo.gl/KiI1cX Subscribe: https://goo.gl/pgDSS8 Website: http://www.modernbuilds.com/ ___ Thanks for watching! -Mike Montgomery MODERN BUILDS http://www.modernbuilds.com/
Просмотров: 425721 Modern Builds
Bench Top Router Table Build - FREE PLANS
 
12:56
FREE PLANS here: https://drive.google.com/file/d/0B1KlroDGOwxVMUNCZlctVWlBbG8/view?usp=sharing In this video I build a very simple bench mounted router table for my 1/4" DeWalt router trimmer. I got the idea from one made by Steve Ramsey. The table and fence are made from 18mm MDF and 38x63 CLS timber for the frame which is fixed together using pocket screws. I used some aluminium t-track with t-bolts for the fence to slide along. I use a double flute straight router bit with a bearing at the top to cut out the square for the acrylic and the groves for the t-track. Some people call it a template or profiler bit. The bearing runs along and follows the MDF template I placed around the acrylic and T-Track which is then removed and and cuts a square/grove to the exact size. You need to set the bit to the same depth as the acrylic or T-Track Here is a link to the bit I used: https://www.trenddirectuk.com/46-900x1-4tc?gclid=Cj0KEQjwuOHHBRDmvsHs8PukyIQBEiQAlEMW0Cxzp70vLUn8olgPuV0H0NDPeqNfSunSUIm2Kc0PhuYaAhEM8P8HAQ
Просмотров: 578925 Happy Wife Happy Life
Build a Work Bench / Assembly Table with T-Track
 
10:39
This assembly table is built to keep everything I used most often close at hand while building and finishing! It has a "rough" side where I keep common tools, screws, clamps, joinery aids, etc.. the "finish" side carries finishes, brushes, cloths, stand offs, paint sprayers, etc. And each end holds a lot of clamps or the power tools I constantly use, my drill, driver, and brad nailer! Plans: https://www.ycmt2.com/product/assembly-table-plans/ Article: http://ycmt2.com/assembly-table/ Bulk Drawer Slides: https://amzn.to/2MihILA True Trac Saw Guide: www.truetracsaw.com Rockler Products: F-Clamp Rack: https://amzn.to/2MRrJjZ Quick-Clamp Rack: https://amzn.to/2Mje4RV T-Track: https://amzn.to/2MP4AyN T-Track Clamp: https://amzn.to/2MNV6nz T-Track Stop Kit: https://amzn.to/2K0IBHj T-Track Long Stop: https://amzn.to/2KdQF3B Bench Cookie Kit: https://amzn.to/2ls46SI Leveling Feet: https://amzn.to/2KebvDi Casters: https://amzn.to/2MNcxEx Tools I used (affiliate links): Table Saw: http://amzn.to/2uRGfSZ Band Saw: http://amzn.to/2uRyGLZ Miter Saw: http://amzn.to/2gYFKAq Jointer: http://ycmt2.com/jointer-setup Planer: http://www.shopsmith.com/ownersite/catalog/planers.htm Chainsaw: http://amzn.to/2v2ZypX Oscillating Spindle Sander: http://amzn.to/2gYdii7 Circular Saw: http://amzn.to/2urkcBj Jigsaw: http://amzn.to/2eJhGB6 Drill / Driver: Makita 18v: http://amzn.to/2gY8edT Router: http://amzn.to/2uuohmI Trim Router: http://amzn.to/2gXsoVl Random Orbit Sander: http://amzn.to/2uRycFo Angle Grinder: http://amzn.to/2vUil5T Lathe tools: http://amzn.to/2vDeEm3 Grinding Jig: http://amzn.to/2uRlJl3 Bench Grinder: http://amzn.to/2vDjrni MAP Torch: http://amzn.to/2uRODlo Center Punch: http://amzn.to/2uuQdqv Blades (affiliate links): Ripping Blade: http://amzn.to/2urKBza Crosscut Blade: http://amzn.to/2urzrdA Plywood Blade: http://amzn.to/2uRGsW1 Bandsaw Blades: http://amzn.to/2uRmnit Shirts for Sale! https://www.ycmt2.com/product/t-shirt/ ///////MY LINKS Website: http://ycmt2.com Patreon: https://www.patreon.com/user?u=4990417 Facebook: https://www.facebook.com/YouCanMakeThisToo/ Instagram: https://www.instagram.com/youcanmakethistoo/ Twitter: https://twitter.com/YouCanMakeThis2 @YouCanMakeThis2 ___ Music from epidemicsound.com #workbench #assemblytable #woodworking
Просмотров: 77352 YouCanMakeThisToo
Build a Cheap Woodworking Workbench
 
08:41
How to build a low budget woodworkers style workbench from 2x4s and plywood. This woodworking workbench can be built with a limited tool set and and for much less than even the cheapest commercial workbench. Free plans to build your own workbench, see here: http://thiswoodwork.com/build-a-cheap-woodworking-workbench ----------------------------------------­---------------------------- Social Links... Blog Channel: http://www.youtube.com/user/ThisWoodworkVlog Facebook Page: http://www.facebook.com/thiswoodwork Twitter Page: https://twitter.com/ThisWoodwork Google Plus: https://plus.google.com/u/0/b/114211522882686187159/114211522882686187159/posts ----------------------------------------­---------------------------- Music thanks to: Josh Woodward: "Hey Ruth (Instrumental)" and "Let It In (Instrumental)" and "Swansong (Instrumental)": http://www.joshwoodward.com/ ----------------------------------------­---------------------------- alex harris woodwork woodworking woodturning thiswoodwork turning how to homemade shopmade shop workshop woodshop shopbuilt craft DIY easy beginner workbench cheap
Просмотров: 581442 ThisWoodwork
How to Build a Workbench - Ep.1
 
16:25
Rockler tools and accessories https://kit.com/GetHandsDirty/rockler-tools-and-accessories Filming gear https://kit.com/GetHandsDirty/filming-gear Support my work on Patreon https://www.patreon.com/gethandsdirty T-shirts and stickers http://gethandsdirty.com/shop/ Instagram https://instagram.com/gethandsdirty Facebook https://www.facebook.com/GetHandsDirty Twitter https://twitter.com/GetHandsDirty Soundcloud https://soundcloud.com/gethandsdirty Here's my PO Box if you want to send a letter: IMPORTANT: If you want to send a gift or anything thicker than an envelope, write me first on social media, otherwise I may never get your package. Cristiana Felgueiras Apartado 43 Batalha - Porto 4031 - 401 Porto Portugal
Просмотров: 795987 Get Hands Dirty
DIY Fold Down Workbench
 
05:29
Wanna build your own? Check out the plans for this project: https://www.wilkerdos.com/product/folding-workbench-plans/ Facebook: https://www.facebook.com/wilkerdos Instagram: https://www.instagram.com/wilker_dos/ Patreon: https://www.patreon.com/user?u=257047 Check out my awesome sponsor Triton Tools!:http://www.tritontools.com/en-US Curious about things I use in my shop? Check it out!: https://www.wilkerdos.com/things-i-use/ For a written tutorial check out my blog at http://wilkerdos.com/2015/03/diy-folding-workbench/ This is a great DIY shop project. This folding workbench is fairly easy to build and adds to the organization of any garage or shop.
Просмотров: 1451767 April Wilkerson
Build a Garage Workbench Video
 
08:49
Mark Donovan of http://www.HomeAdditionPlus.com shows how to build a garage workbench. This video will show you step by step how to build a workbench that is rugged and will stand the test of time and abuse. This workbench is ideal for the garage or basement. If you want plans for this work bench get my "Build a Garage Workbench" eBook at: http://www.homeadditionplus.com/Bid-Sheet-Ebook-info/Build-Garage-Workbench-Ebook.htm. It includes workbench design plans and is loaded with instruction pictures on building a workbench.
Просмотров: 1046796 HomeAdditionPlus
Woodworking, The Samurai Workbench
 
10:57
A once in a lifetime woodworking project. It was one of the best, most rewarding experiences of my life. There is nothing I can't build now. I used Maple(top,trestles), Walnut(contrasting pieces), Garry Oak(legs)and Red Oak(vises). Get the plans here: http://samuraicarpenter.com/the-ultimate-workbench-plans Vice Hardware:http://www.leevalley.com/en/Wood/page.aspx?p=45114&cat=1,41659
Просмотров: 2680751 The Samurai Carpenter
PAULK WORK BENCH
 
08:54
ORDER PLANS HERE: http://www.paulkhomes.com/order-plans.html Check out the latest video on the Paulk Homes Channel on the updated workbench: Paulk Work Bench II This work bench was designed by a seasoned finish carpenter and home builder who saw a need and addressed it. This work bench is field tested and works. Beauty, Simplicity, Functionality describe this unique answer to an age old problem. It is amazing to me the attention my work bench is getting. This unit is the basic idea fleshed out in a functional design a carpenter can build in his shop. I have many improvements and details, I will be adding to the design. The main upgrade I am working on is a design to make this unit mass produceable and shipable. I would be interested in getting feed back from those who think this might be a good tool to bring to the market. http://www.paulkhomes.com
Просмотров: 701563 Ron Paulk
Miter Saw Station // Woodworking How To
 
10:17
See how I made a simple miter saw station! Sponsored Promo Code: “make” for $50 off a premium mattress: http://www.casper.com/make Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com In my old shop, I never really had room for a proper miter station. I dealt with it but also ways to move things out of the way to cut an 8' piece of material and come up with creative (and some times dangerous) stop block situations. In the new shop, I have plenty of space, so it was time to make a dedicated place to use the miter saw. I didn't want to go overboard with storage or complexity and wanted it to still be relatively compact. I also had 2 days to build it in between projects, so it had to be simple.The only real requirements for me were that it had to be cheap, easy, fast and it needed a sliding stop block system. I think I hit all of those points while still getting a solid work surface that has PLENTY of space for future improvement in the form of storage. There is space above and below to add storage and the simply dust collection ports help keep the whole area clean. Check it out, and if you want to build you own, click below GET DIGITAL PLANS https://www.iliketomakestuff.com/product/miter-saw-station-digital-plan/ TOOLS & SUPPLIES: http://amzn.to/2xkEzOJ - Lego Shirt https://kit.com/iliketomakestuff/miter-saw-station https://kit.com/iliketomakestuff/my-woodworking-tools https://kit.com/iliketomakestuff/shop-safety-gear Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms
Просмотров: 868930 I Like To Make Stuff
Bench Top Router Table Build
 
09:39
Plans: https://ibuildit.ca/plans/bench-top-router-table/ Project build article: https://ibuildit.ca/plans/bench-top-router-table/ Making the top: https://youtu.be/ObFd5wpkiZM Building the bench top router table from the plans available on my website. This table was designed to work with my precision router lift: https://ibuildit.ca/projects/precision-router-lift/ The table saw extension wing router table: https://youtu.be/GACFPp-ygKE Ways you can help support this channel: Patreon: https://www.patreon.com/user?u=865843&ty=h Project plans for sale: https://ibuildit.ca/plans/ More videos on my second woodworking channel: http://www.youtube.com/c/IBuildIt My home reno channel: http://www.youtube.com/c/IBuildItHome My "Scrap bin" channel: https://www.youtube.com/c/IBuildItScrapBin Website: https://ibuildit.ca/ Facebook: https://www.facebook.com/I-Build-It-258048014240900/ Instagram: https://www.instagram.com/i_build_it.ca/
Просмотров: 271856 John Heisz - I Build It
100% Pallet Wood Woodworking Workbenches
 
05:24
Get the plans for the workbench & vise that I added later! http://bit.ly/JackmanWorkbenchPlans ➤ Please share and subscribe? http://www.youtube.com/subscription_center?add_user=jackmancarpentry Details! ▼ These workbenches were made 100% from pallet wood. The tops are 36" x 40" x 2" thick, all laminated from pallet slats. The main frame is fabricated from 3.5" x 2.5" pallet timbers and 1.5" thick pallet slats, all from a super heavy duty pallet. The casters are locking 4" casters. Everything is fastened from the underside, or the inside of the frame, leaving zero visible fasteners. The top includes poplar, pine, white oak, red oak, maple, and cherry! I haven't yet decided on a finish for the workbench, but right now I think I'm going to put a really thin coat of epoxy to seal and protect the top. Many more modifications will be made to this in the future, including a bench vice, storage underneath, and I'm sure many other things. I have a feeling these are just going to be a canvas. Fart. CREDITS & PROJECT SPECIFIC LINK ■ Pallet Upcycle Challenge 2016 playlist: http://www.youtube.com/playlist?list=PLVRSIqwQ1XHq95MdlOeOe7k6kwq4sUbGi ■ More project photos: https://www.jackmanworks.com/pallet-wood-workbenches/ GENERAL PANDERING LINKS ■ http://www.jackmanworks.com ■ http://www.instagram.com/jackman_works/ ■ http://www.twitter.com/JackmanWorks ■ http://www.facebook.com/jackmanworks Plans, stickers, t-shirts, etc: http://www.jackmanworks.com/shop MUSIC ■ Music by BrucePeninsula: http://soundcloud.com/brucepeninsula/dont-wake-the-giant
Просмотров: 971437 Jackman Works
EASY DIY WORKBENCH for UNDER $50
 
06:10
In this video I show you how I made this easy Workbench/ table saw out feed table for under $50. Material list - 8 - 2x4 at stud length - 1 - 1/2" sheet of plywood ( I had the sheet cut for me at Lowes since I dont have a truck ) - box of 2 1/2" wood screws Tools used - Dewalt impact drill - http://amzn.to/2jaEfva Dewalt circular saw - http://amzn.to/2jtv0qz Cut list - plywood rip to 2'9" x 5' - 4 2x4 @ 34" - 2 2x4 @ 2'9" - 2 2x4 @ 57" - 2 2x4 @ 27" - 2 2x4 @ 54" You can use the left over plywood to make a little shelf on the bottom if you'd like. If you liked this video please subscribe and comment what you would like to have me build next
Просмотров: 189219 Matt Mecham
DIY Outdoor Garden Work Bench
 
04:34
This garden work bench is a simple outdoor project that is great for all your garden needs. With just a few everyday tools and some framing lumber you can easily build this useful project. Darbin Orvar Shoppe http://darbinorvar.com/shoppe Learning About Wood Turning (w/ Carl Jacobson) https://www.youtube.com/watch?v=OOAedc98Zv4 Garden Tool Box https://www.youtube.com/watch?v=q7qY6iybzRM Support Page: http://darbinorvar.com/support Social Media http://twitter.com/darbinorvar http://instagram.com/darbinorvar
Просмотров: 38345 Darbin Orvar
Entryway Bench | Red Hot Building
 
02:10
Storage and seating all in one place. On this week's episode of Red Hot Building, Amanda Mertz shows you how to build an entryway bench. It's pretty awesome! Like this? See more Amanda: https://www.youtube.com/watch?v=iD8UM802s_w See Amanda build a coffee cup holder out of a pallet: https://www.youtube.com/watch?v=ccLQgIs4NM4 ___ Check this out!!! http://ratedred.tv/youtube ___ For all of today's stories head over to: http://www.RatedRed.com Facebook - http://www.facebook.com/realratedred Twitter - http://twitter.com/realratedred Instagram - http://www.instagram.com/realratedred AC - Abby Casey; IG/Twitter - @acoutdoors PE - Paxton Elrod; IG/Twitter - @paxton_elrod RR - Richard Ryan; IG/Twitter- @RichardRyan ___
Просмотров: 1322329 Rated Red
Build a Workbench / Outfeed Table
 
06:20
This combination workbench / table saw outfeed support / assembly table is extremely functional and contains plenty of storage space! Additional Details, Parts, Tools Used, and Plans: https://aroundhomediy.com/build-workbench-outfeed-table/ And check out Our Workshop page to see a full list tool and items in our shop: https://aroundhomediy.com/our-workshop/ Music: Doumdidum by Marceau https://creativecommons.org/licenses/by/4.0/
Просмотров: 136295 Around Home DIY
Build a massive mobile workbench / assembly table - Easy to make workbench in one day!
 
10:53
In this video I show you how to make a really simple workbench/assembly table that can be made as big or as small as you need. Get the plans: http://jordswoodshop.net.au/downloads/mobile-workbenchassembly-table/ Show Sponsor: http://www.IWoodLike.com.au Web Page: http://www.JordsWoodShop.com - Social: http://www.facebook.com/JordsWoodShop http://www.instagram.com/JordsWoodShop Support the show by shopping here: Favourite glue: http://amzn.to/2t3QJux My Mitre Saw: http://amzn.to/2toikWE My Radom Orbit Sander: http://amzn.to/2t3UKPL / http://amzn.to/2ry3Vpt My Palm Sander: http://amzn.to/2s2Nbu4 My Drills: http://amzn.to/2sqOzHF My Jig Saw: http://amzn.to/2t3Qfod My Multi-Tool: http://amzn.to/2suj1RU My Favourite Glue Bottle: http://amzn.to/2scoJoH Push Blocks: http://amzn.to/2s3jgSB My Big Router: http://amzn.to/2s2WfPr My Small Router: http://amzn.to/2sCnrWq My go to Router: http://amzn.to/2s32iDL My Favourite Clamps: http://amzn.to/2sC88gr My Quick Clamps: http://amzn.to/2sqPQhF My Tape Measure: http://amzn.to/2sBW0Ml My Favourite Combination Square: http://amzn.to/2sBuMpu Best Saw Blades: http://amzn.to/2rxEfcO My Domino Joiner: http://amzn.to/2t3VHaJ My Shop Vac: http://amzn.to/2scitgA My dust Extractor: http://amzn.to/2sC1TcH My Camera: http://amzn.to/2ryh6H4 My other Camera: http://amzn.to/2togHIE My Drone: http://amzn.to/2sC43sw My Microphone: http://amzn.to/2surYuj My other Microphone: http://amzn.to/2t4jpDG
Просмотров: 25836 Maker Addiction
How To Build A Sturdy Work Bench | SUPER SIMPLE!!
 
20:15
How to build a sturdy and simple work bench. HERE IS A LINK TO SOYLENT: https://goo.gl/AtBNLg HERE IS A LINK TO MY RTIC COOLER: https://goo.gl/8yEz5W SUBSCRIBE: http://bit.ly/2btWfQR WATCH MORE WRANGLERSTAR: “Recent Uploads” - https://goo.gl/Y1bFko "How To" - https://goo.gl/uFp1fu "Back To Basics" - https://goo.gl/Ghfpbe "Family Vlogs" - https://goo.gl/s8sjTL "Wildland Firefighting" - https://goo.gl/z5yj1v "MY FAVORITE TOOLS" - http://www.wranglermart.com "Our New Book" - http://www.masterbooks.com/wranglerstar/ "Contact Wranglestgar" - wranglerstardiy@gmail.com "Wranglerstar Web Store" - http://www.wranglermart.com Wranglerstar Shirts: http://wranglerstar.spreadshirt.com/ SOCIAL NETWORKS Tumblr: http://wranglerstar.tumblr.com/ Instagram: https://instagram.com/mrwranglerstar/ Facebook: https://www.facebook.com/wranglerstar1 Twitter: https://twitter.com/wranglerstar Link to Bench Plans: https://goo.gl/ccG9FW
Просмотров: 257323 Wranglerstar
15 Potting Bench Plans To Make Gardening Work Easy
 
02:31
Potting bench is going to add luxury to your gardening experience with these free plans; moreover, it is an essential technique to make sure everything extra within the garden space remains organized. Important gardening items like empty pots, soil pots, gardening tools, fertilizers and related supplies can be kept at one location. You don’t have to spend lots of money on buying such a gardening table, in fact, you can create one on your own. There are so many detailed and comprehensive diy potting bench plans available online that you would not face any trouble carrying out activity on your own. Listed below are some of the simplest gardening bench plans that are going to make your life easier, once you are done with it. 1- $150 DIY Potting Bench Plan Using this potting bench plan you can create a gorgeous looking, spacious bench for the garden. It has two large slabs for placing pots and vertical board for hanging tools, it’s simple yet elegant. 2- Pallet Potting Station Foldaway recycled pallet is perfect outdoor potting station that can be fixed against the wall. Know the simple steps leading to successful completion of the project. The expertise required for the construction of this garden work bench might not be for starters, but if you seek help from a professional, it is going to be real fun activity. 3- Redwood Table Plans Redwood garden potting bench is going to accommodate everything extra that is placed in your garden. Since the wood used is weather resistant, the table is going to last for years. The beauty of the table lies in its design which includes so many small and big compartments for organizing supplies. 4- Treated Lumber Potting Table Well at first sight it is going to look like a mini dressing table. Sophisticated, elegant and beautifully designed, this is perfect type of outdoor potting bench that can surge the beauty of your garden space. If you have good carpeting skills, take out two weeks time and you would be done. 5- DIY Potting Bench Look at the way Tom Thulen teaches you how to build a bench for your garden space . This is one of the most versatile plans with proper detail of each step. 6- Three Level Potting Bench Choose cedar of treated lumber for starting the construction of this particular type of bench. The expertise required are medium level with 7 to 8 hours to have it done. 7- Beginner Level Bench Plan If you haven’t find anything that you may think is the right DIY activity for you, read Ana White’s beginner level bench plan – nothing can be more convincing than this one. 8- $200 Year Round Garden Station Once you have this, you would not have to worry about anything; with proper space and elegant design, this is going to win hearts of all. 9-14 Step Bench Plan Very simple, quick and detailed plan regarding the making of potting bench is here for you. Learn in detail about materials, supplies, and tools to avoid any chaos and complete the bench making process with desired results. 12- Tri-Wood Potting Station Working on H Shaped module, the designer has used three different types of wood to attain the perfect and elegant looking potting plan for small garden spaces. 11- Simple Garden Potting Bench With various shelves and attractive design, this potting plan works well for those who have to accommodate larger supplies or pots in the garden. view the detailed video tutorial here, there is no room for any mistake now. 12- Custom Potting Bench The best thing about custom plans is that you get the perfect shape or space you require. While working on such a plan you can ideally create a masterpiece in your home to suit the need of your garden supplies. Moreover, if you master the art of making elegant potting benches, you can sell them too. 13- Short Potting Bench In case you don’t want to spend time making a proper potting station, you can work out with this simple idea – a small table looking DIY bench is going to help you with organizing the gardening tools and pots. 14- Elegant Garden Workbench To all the gardeners who have heart into their spaces, this plan is going to ease your work, while adding ultimate beauty to the garden area. Learn here how to get the task done. 15- Pallet Potting Workstation To be honest, this plan is not much organised or pretty, but it is going to work really well for those who just intend to have basic pallet potting work station for keeping their gardening belonging.
Просмотров: 10372 Alexis Bellamy
Mega Workbench - How to Make a Woodworking Bench
 
13:45
MORE PROJECT AND TIPS: http://makebuildmodify.com/ In this video: How I made a MEGA workbench out of reclaimed wood. I remodeled an old barn last summer. While demolishing the interior I had a chance to recover some of the old lumber. I stored it for a few months until I had time to build this woodworking bench. It weighs over 850 pounds and required 600 screws, 1 ½ gallons of wood glue, 44 9’x2”x6” Douglas fir, and about 40 hours to build I hope I cover enough detail in this video to be helpful. Thanks for watching! (affiliate links) - These help fund the videos at no extra cost to you. TOOL LIST: Measuring and marking: Tap measure ----------------------------------------- http://amzn.to/2ddgDDW Swanson Speed Square ------------------------ http://amzn.to/2eE8BqC Framing square ------------------------------------- http://amzn.to/2e0b7IT Mechanical Pencil --------------------------------- http://amzn.to/2dB6X71 Sharpie Marker -------------------------------------- http://amzn.to/2edfD5H Fastening: 3M blue tape ----------------------------------------- http://amzn.to/2e0aHSG Wood glue --------------------------------------------- http://amzn.to/2dQSbsU Wood Screws ---------------------------------------- http://amzn.to/2lubzP7 Bar Clamp, 48-inch -------------------------------- http://amzn.to/2kxQTrW Cutting and drilling Short Blade 3-Piece Wood Chisel Set --- http://amzn.to/2jJf4oB Skilsaw -------------------------------------------------- http://amzn.to/2bSiCAK Hand saw ---------------------------------------------- http://amzn.to/2dU5WdN Japanese woodworking Hand Saw ------ http://amzn.to/2dqe2Mg Table saw --------------------------------------------- http://amzn.to/2dQSrs1 Chop saw ---------------------------------------------- http://amzn.to/2dItFyf Milwaukee Drill -------------------------------------- http://amzn.to/2cOGXaH High-Speed Steel Drill Bits -------------------- http://amzn.to/2c9pX0k Utility knife -------------------------------------------- http://amzn.to/2cgK4Hn Fortsner bits ------------------------------------------ http://amzn.to/2dtXYFE Hammers: Framing Hammer with Smooth Face ---- http://amzn.to/2c20e8F Dead Blow Mallet ---------------------------------- http://amzn.to/2kNSecI FOLLOW: TWITTER: https://twitter.com/MakeBuildModify INSTAGRAM: https://www.instagram.com/makebuildmodify/ PINTEREST: https://www.pinterest.com/MakeBuildModify/ YOUTUBE: https://www.youtube.com/c/MakebuildmodifyTV FACEBOOK: https://www.facebook.com/MakeBuildModify/ G+: https://plus.google.com/+MakebuildmodifyTV/ WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Always think ahead. Every project you try is at YOUR OWN RISK.
Просмотров: 2975910 Make Build Modify
How to make a DIY workbench with pallets
 
13:27
A simple guide on how to build this sturdy wooden workbench from pallets. This pallet project works great as a garage workbench and can be used to store your tools. If you need guidance on how to dismantle and recycle a pallets safely please watch our video guide. HOW TO DISMANTLE A PALLET: https://www.youtube.com/watch?v=gPi0zDsqJUo PALLET PROJECT SERIES: https://www.youtube.com/playlist?list=PLWYlGdEsoWd5l9RLqkmE4e-9IuP9W3mNL SUBSCRIBE: https://www.youtube.com/channel/UCjO0gG2A5ki2n7HNZD0Sv7A?sub_confirmation=1 INSTAGRAM: https://www.instagram.com/silverline_tools/ TWITTER: https://twitter.com/SilverlineTools FACEBOOK: https://www.facebook.com/SilverlineTo... BUY THE TOOLS: http://www.silverlinetools.com Silverline Tools How To videos are for reference purposes only. Undertaking these projects is entirely at your own risk. Read safety instructions before operating any power tools and always wear appropriate protection.
Просмотров: 333323 Silverline ToolsTV
Simple sturdy workbench build
 
09:39
A workbench made from 2x4s and an old door, using a circular saw and a hand drill. http://woodgears.ca/workbench
Просмотров: 2693976 Matthias Wandel
my dream work bench
 
22:21
I build my dream work bench from pine and purple heart
Просмотров: 1208294 KingPost TimberWorks
Roubo-style Workbench Introduction
 
09:51
This workbench is based on a design by the 18th century French carpenter and author André Jacob Roubo. Guido Henn, the German master cabinetmaker, built it for Fine-Tools.com. Henn has 20 + years of experience as a woodworker, teacher, and has written for a number of woodworking publications. A modern adaptation with high-quality accessories first became possible because of the hardware developed and produced by the American manufacturer Benchcrafted. As Henn built the prototype bench, we also drew up a detailed set of plans and made explanatory videos so that any reasonably experienced woodworker could build their own Roubo-style workbench. All plans and instructions are free and can be downloaded here: http://www.fine-tools.com/roubo-hobelbank.html
Просмотров: 3293391 Fine Tools
Build A Simple Sturdy WORK BENCH for $150
 
20:40
Build a simple sturdy workbench using only 2x6 Lumber. SUBSCRIBE: http://bit.ly/2btWfQR WATCH MORE WRANGLERSTAR: “Recent Uploads” - https://goo.gl/Y1bFko "How To" - https://goo.gl/uFp1fu "Back To Basics" - https://goo.gl/Ghfpbe "Family Vlogs" - https://goo.gl/s8sjTL "Wildland Firefighting" - https://goo.gl/z5yj1v "MY FAVORITE TOOLS" - http://www.wranglermart.com "Our New Book" - http://www.masterbooks.com/wranglerstar/ "Contact Wranglestgar" - wranglerstardiy@gmail.com "Wranglerstar Web Store" - http://www.wranglermart.com Wranglerstar Shirts: http://wranglerstar.spreadshirt.com/ SOCIAL NETWORKS Tumblr: http://wranglerstar.tumblr.com/ Instagram: https://instagram.com/mrwranglerstar/ Facebook: https://www.facebook.com/wranglerstar1 Twitter: https://twitter.com/wranglerstar Link to Bench Plans: https://goo.gl/ccG9FW
Просмотров: 184547 Wranglerstar